Flojet Accumulator Tank 1L : 30573

Flojet Accumulator Tank 1L : 30573

The accumulator tank for Flojet water dispensing systems. The accumulator tank is a water chamber which has a pre-pressurized internal air bladder. It is installed in the pressured side of your pump and is intended to dampen water pressure spikes, reduce pump cycling and help increase the pump's life. The accumulator tank also helps to reduce noise, eliminate water hammer, and improve temperature control..

The compact pneumatic bladder tank is designed for smaller space and systems, and mounts easily in any position. It is ideal for low volume water supply applications. Tank is pressured to 10 psi (0.7 bar) and can be fine-tuned to the cut-in pressure of a pump.

Snap-in Port Fittings include both 1/2" barbed hose fittings and 1/2" threaded hose fittings

What;'s in the box?

• 1 x Flojet Accumulator Tank 1L
• 2 x Port Adapters
• 2 x Adaptor Clips
• 1 x Port Kit

Pre-Charge Pressure Adjustment

The 30573-0001A tank is precharged at 10 psi (0.7 bar). If your pump cut-in pressure is significantly different, you may custom tune the tank to best fit your particular installation. To increase air pressure in tank, shut pump off, open a faucet to relieve system pressure and adjust precharge pressure using ordinary tire gauge and tire pump at valve in end of tank. Pressure should be checked from time to time. To check tank pressure: turn off power to water pump, open a faucet to relieve pressure. Check tank pressure, adjust if necessary. Close faucet and turn on power to pump. For best results, do not pressurize tank above 20 psi (1.4 bar).

Features

• Capacity: 1 litre or 33 fl oz
• Maximum operating pressure: 125 psi (8.6 bar)
• Port type: 12.7mm (1/2") barbed quick-connect
• Approvals: NSF Standard 18 listed
• Internal Bladder
• Smoother and More Even Flow
• Quieter Water System
• Better Temperature Control
• Longer Pump Life
• Lower Battery Drain
• Simply Fitted to New or Existing Systems
• Compact Size
• Snap-in Port Fittings include both 2½" Barbed Hose Fittings and 2½"-14 Threaded Hose Fittings