Rhino Large 600mm In-Bench Milk Jug Rinser with Spinjet

Rhino Coffee Gear Spinjet Milk Jug Rinser 600mm

Rinsing milk jugs between each use is beneficial to the proper production of quality textured milk. Although a simple idea, the Milk Jug Rinser is perfect way to rinse jugs in a busy environment. For best results use a pressure reduction valve on the water inlet line.

• All surfaces are sloped to drain.
• 304 Stainless steel construction.
• Brushed finish sink body and polished rinser mechanism
• No sharp edges, corners are rounded for safety.
• Secure mounting with 4 mounting clips.
• For use with water temperature below 86F.
• Removable drain grate design makes cleaning easy.

What's in the box?

• 1 x Rhinowares spinjet milk jug rinser
• Parts included with each rinser you will find some fittings to make installation easier

Depth Requirements:

The Rhino rinsers are 1.57" deep, however, this is without fittings. We recommend at least 6" of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.

Do not cut out bench top surfaces prior to receiving your rinser: Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical vessel rinser on-hand prior to cutting into bench top surfaces.

Features

• Spinjet Spray Mechanism - The new spinjet valve sprays and spins at the same time creating a more robust mechanical cleaning action than normal rinsing valves. It is ideal for plungers using tea and coffee grounds, milk and other residues that tend to hold firm.
• Better Drainage - The drain tray has an improved design to ensure there is no static build-up of residue along with a generous drain outlet.
• Bigger Vessels - The large actuator plate makes it useful across a broader range of equipment.
• NSF Certified - All Rhinowares Milk Pitcher Rinsers are NSF Certified.
• Stainless Steel - In-Bench
• Width - 238mm x Length - 600mm

What else might I need?

• Pressure reduction valve - 620400 - (MUST BE INSTALLED TO NOT VOID THE WARRANTY)